9 USA Mower Blades for Scag 48110 481706 481710 Toro 107-3192 110-0414 107-3194 Hustler 795757 601014 Length 16-1/2 in. Width 2-1/2 in. Thickness .240 in. Center Hole 5/8 in. 32 in. 48 in. Deck

What It Is

This is a set of 9 aftermarket mower blades designed for 32-inch and 48-inch commercial walk-behind mowers, primarily fitting Scag, Toro, and Hustler models. They are a direct replacement for OEM part numbers Scag 48110, 481706, 481710; Toro 107-3192, 110-0414, 107-3194; and Hustler 795757, 601014.

Fitment & Compatibility

Before buying, confirm three things:

• Deck size: These blades are 16-1/2 inches long, intended for 32-inch and 48-inch decks. They will not fit 36-inch or 52-inch decks.
• Measurements: Length 16-1/2 in., width 2-1/2 in., thickness .240 in., center hole 5/8 in. Measure your current blade to verify these match exactly.
• Model check: While listed for Scag, Toro, and Hustler, cross-reference your mower’s model number with the OEM part numbers above. Aftermarket blades may vary slightly in lift or thickness from OEM, so verify spindle clearance (especially on older decks).

Key Things to Know

• Quality vs OEM: These are aftermarket blades. They typically cost less than OEM but may use different steel grades or heat treatment. Check for balanced sets to avoid vibration.
• Installation: Installation is straightforward—use a torque wrench to 70-90 ft-lbs, and always replace all blades at once for even cutting. No special tools beyond a socket and wrench.
• Gotcha: The 5/8-inch center hole is standard, but some Toro spindles use a 7/8-inch hole with a bushing. Verify your spindle’s center hole size before buying.
• Quantity: You get 9 blades in the pack—enough for a 48-inch deck (which uses 3 blades) with 6 spares. If you only need 3, this is overkill unless you want backups.

Should You Buy It

Buy this if you maintain multiple 32-inch or 48-inch Scag, Toro, or Hustler walk-behinds and want a cost-effective bulk supply of blades. It’s not ideal for a single homeowner with one mower—you’ll have excess blades. If you need exact OEM fitment for a commercial fleet, stick with OEM; otherwise, this pack offers good value for frequent replacements.